Perforated sheets are used in a wide range of sectors due to the fact that they are very versatile and can be manufactured in a wide range of materials.
Features
resistance, permeability, transparency
Use
used for filtering, separating, protecting, soundproofing, decoration, washing, drying, etc. Used in the chemical, food, mining, automotive, and sugar industries, quarries, cement factories, construction sites, distilleries and many other sectors.
Materials
stainless steel (AISI 304, AISI 304L, AISI 316L, AISI 310, AISI 321 – AISI 430 – AISI 904), carbon steel (FE360 – FE510), galvanised, high strength steel (FE510 – S700 – VELDOX 700), polypropylene, polyethylene, pvc monel, inconel, hastelloy, aluminium (alloy 1050, alloy 5754), cupronickel, nickel, duplex, superduplex, brass, copper, titanium and others
Certificates
the materials can be accompanied by chemical analysis certificates and mechanical tests
Sheet metal sizes
1000×2000 – 1250×2500 – 1500×3000 mm – sizes according to customer’s drawing – (edges and perforated areas on request)
Thicknesses
from 0.4 mm to max 20 mm
Hole type
round holes, square holes, elongated holes, bevelled holes, fancy holes, rhomboid holes.
In Stock
sizes 1000×2000 – 1250×2500 mm
AISI 304 – AISI 316 – iron – aluminium
For technical reasons relating to mould construction, the distance between the punches can be double or triple the perforation pitch. Therefore, in certain processes, the perforation pattern is only completed after the second and sometimes after the third punch. The same applies to the end of the perforated area.
The start and end can be made regular in many perforations as long as previously agreed upon.
In perforated sheets, the direction of perforation is usually aligned with the largest side of the sheet. Reverse pattern must be specifically requested.
In general, standard sheets up to 2 mm thick have minimal solid edges only on the long sides.
Sheets up to 3 mm thick have minimal solid edges on both the short and long sides. On specific request we can also supply sheets with different edges. See our catalogue for more details.
Also available, on the basis of drawings or technical specifications, are micro-perforated sheets, edges or unperforated areas inside the sheet. Please send drawing or technical specifications.
The perforation process is followed by flattening, which makes the sheets flat thanks to the weight of the press mould.
For some productions, fixing holes, folds, discs, curvatures are made, if previously agreed upon at the time of quotation.
No sales to private individuals
