Use and diameter of holes
Perforated sheets with round holes are the most in demand. The diameter of the holes goes from a minimum of 0.4 mm to a max 120 mm (other holes on request).
Materials
Stainless steel (AISI 304, AISI 304L, AISI 316L, AISI 310, AISI 321 – AISI 430 – AISI 904), carbon steel (FE360 – FE510), galvanized, high strength steel (FE510 – S700 – VELDOX 700), polypropylene, polyethylene, pvc monel, inconel, hastelloy, aluminium (alloy 1050, alloy 5754), cupronickel, nickel, duplex, superduplex, brass, copper, titanium, etc.
Sheet size
1000×2000 – 1250×2500 – 1500×3000 mm – custom-made sheet sizes – (edges and perforated areas on request)
Thicknesses
from 0.4 mm to max 20 mm
Hole pattern
Round holes at 60° – 90° – 45°.
Pitch (centre distance)
Distance between the centres of two adjacent holes. Where not so requested and specified the pitch is standard
In Stock
Sizes 1000×2000 – 1250×2500 mm
D: Diametro foro
P: Passo (Interasse)
For detailed calculation, including drawing, weight and card, please refer to the dedicated procedure
No sales to private individuals
